Batch verify
Jelly Force Batch Verification: Lot Codes and Arrival Checks
Quick answer
Lot JEL-26/JE-8318 and CoA reference JEL-8318-26-JE are reference labels for matching an order to a production run. Neither is lab proof, and no test document is published behind either one. The checks that do work are physical: the seal under the cap, the panel, the distributor block and the lot code stamped on your own bottle.
Two codes, both unverified
What the two numbers do, what they cannot do, and the checks that work without trusting anyone.
Two identifiers are published for this product. Lot JEL-26/JE-8318 names a production run, and JEL-8318-26-JE is a reference pointing at a certificate of analysis in the maker's records.
Neither has a document attached to it on this site, the label or the sales page. A reference with no target is a filing code.
Lot and CoA numbers are reference labels for matching an order. They are not lab proof. They still belong on a support call, because they narrow a complaint to one run.
- 2Published batch identifiers
- 0Published test documents
- 0Laboratories named
- 1Physical check the label demands
The arrival check, step by step
Open the parcel and read the invoice
The order email and the packing slip should agree on the pack size. Six bottles ordered means six bottles in the box.
Check the cap seal before anything else
The label says not to use the bottle if the seal under the cap is broken or missing. Lift the cap and look at the seal before you touch a gummy.
Read the panel on your own bottle
It should show a serving of 1 gummy, 30 per container, and one blend row reading 82 mg with a dagger beside it.
Match the distributor block
The wrap should print Info Wealth CO, Pinellas Park, FL 33781, 888-338-0317 (as printed on the label). That block is how a bottle is traced back to whoever placed it on the market.
Photograph the lot code and any expiry date
Both are stamped on the bottle rather than printed in the artwork. The images supplied to this desk show neither, so your photograph is the only record.
Count the gummies on day one
30 is what the wrap promises. A short count is worth a call while the order is fresh.
Store it, then note the purchase date
Store at room temperature, 59-86 degrees F (15-30 degrees C). Keep the bottle tightly closed. Write the purchase date next to the bottle, because the 60-day window runs from it.
Seven checks, five minutes, all before the first gummy. Several are impossible later: a seal cannot be unbroken, and a short count cannot be proved after a week of use.
The seal under the cap
The label is direct about it: for your protection, do not use if the seal under the cap is broken or missing. That sentence is the only verification step the manufacturer asks of a buyer.
Check it under good light. Torn, lifted at the edge, re-stuck or simply absent all count as broken.
Photograph the cap before you remove anything. That photograph is your evidence if the bottle has to go back.
The panel your bottle should carry
Supplement Facts
Serving size: 1 gummy · Servings per container: 30
| Amount per serving | Amount | % Daily Value |
|---|---|---|
| Calories | 10 | |
| Total carbohydrate | 3 g | 1% |
| Total sugars (including 3 g added sugar) | 3 g | 6% (added sugar) |
| Sodium | 4 mg | <1% |
| Proprietary BlendMuira puama extract, Maca extract, Catuaba extract, Green tea extract, Caffeine, Ashwagandha, L-Arginine, Tribulus terrestris, Horny goat weed extract | 82 mg | † |
† No Daily Value has been set for this blend. It comes to 82 mg per gummy, and the label adds that this is equivalent to approximately 567 mg of dry powders, as the label puts it. Eight of the nine ingredients inside it carry no figure of their own. Other ingredients listed on the wrap: Corn syrup, cane sugar, water, apple pectin, sorbitol liquid, natural flavors, citric acid, sodium citrate dihydrate. Allergen statement: not published.
Compare the wrap in your hand against those rows. Serving size, servings per container and the single blend figure are the three lines worth reading twice.
One row carries nine ingredient names and one number. The panel page takes that row apart.
What the distributor block should read
| Printed element | What to compare it against | What it does not tell you |
|---|---|---|
| Distributed by | Info Wealth CO, Pinellas Park, FL 33781, 888-338-0317 (as printed on the label) | Who manufactured the gummies, which the label never names |
| The 888 phone number | The number printed on your own wrap | Nothing about your order: it is the distributor's line, not this desk |
| Origin statement | Made in the USA with globally sourced ingredients (as printed on the label) | Where any individual ingredient was grown or extracted |
| GMP statement | The line stating production in a GMP facility | Whether this batch was tested by anyone |
| Other ingredients | Corn syrup, cane sugar, water, apple pectin, sorbitol liquid, natural flavors, citric acid, sodium citrate dihydrate | Allergens, since no allergen statement is published |
| Lot code | The stamp on your bottle, photographed on day one | Test results, potency or purity for that run |
The distributor block is the most practical part of the wrap. It is the address a regulator, a pharmacist or a complaint follows.
Order questions still go to +1 (302) 200-3480. The 888 number belongs to the company printed on the bottle.
Asking for the document instead of the number
- Ask for a certificate of analysis tied to the lot code stamped on your bottle, not to JEL-8318-26-JE.
- Ask which laboratory ran it, and whether the lab is independent of the manufacturer.
- Ask for the test date and the methods used for identity and potency.
- Ask whether the panel covered heavy metals, microbial counts and undeclared drug ingredients.
- Ask for the answer by email, so the reply is in writing and dated.
- Write down who you spoke to and when, whatever the answer turns out to be.
A seller who can produce that document has answered the question. A seller who repeats the reference number has answered a different one.
The testing and quality page sets out where each of the ten seals stops.
When something does not line up
| What you find | What it can mean | What to do about it |
|---|---|---|
| Seal under the cap broken or missing | Tampering, or damage in transit | Do not use the bottle. Photograph it and call the order desk |
| Fewer than 30 gummies | A filling error or a short pack | Count again, photograph the open bottle, then call while the delivery is recent |
| No distributor block on the wrap | A bottle that did not come through the published route | Treat it as unverified and ask for a refund under the window |
| Wrap wording differs from this page | A newer or older label revision | The bottle wins. Send the difference to [email protected] |
| Gummies fused into one mass | Heat in transit or in storage | Store at room temperature, 59-86 degrees F (15-30 degrees C). Keep the bottle tightly closed. Ask the desk before taking anything from it |
| No order email or tracking number | An order placed outside the authorized page | Contact the seller you actually paid, then check your card statement |
Every row above is easier to act on in week one. Evidence goes stale faster than the window closes.
Records worth keeping for 60 days
Keep all three until the window closes. The guarantee page has the claim steps, and the refund page follows the parcel back.
None of this replaces a laboratory result. It is what a buyer can check without trusting a roundel.
Jelly Force batch and lot questions
Can I look up lot JEL-26/JE-8318 anywhere?
No public lookup exists. Lot and CoA numbers are reference labels for matching an order. They are not lab proof. The number is useful on a support call, because it tells the desk which production run a bottle came from.
What is the difference between a lot number and a CoA reference?
A lot identifies a production run. A certificate of analysis is a test document about that run. Here the reference JEL-8318-26-JE is published without any document behind it.
What should I do if the seal under the cap is broken?
Do not take a gummy from that bottle. Photograph the cap and the seal, then call +1 (302) 200-3480 with your order ID and ask what the desk wants done with it.
What if the lot code on my bottle is different?
A different code is normal, because production runs change. It means the code on this site is a reference from the supplied material rather than the code on every bottle.
Is an expiry date printed on the bottle?
The images supplied to this desk show no expiry date and no lot stamp, so neither can be quoted here. Look for both on the bottle itself and photograph what you find.
Does a GMP facility mean each batch was tested?
No. Good Manufacturing Practice describes documented procedures inside a plant. Batch testing is a separate document, and none is published for this product.
Why does the buying route matter for batch checks?
Because a bottle bought outside the authorized route cannot be matched to an order, a lot or a refund window. FDA also keeps finding hidden prescription drugs in men's products sold online (FDA, 2026).
Who do I ask for a certificate of analysis?
Start with the order desk on +1 (302) 200-3480. The distributor block on the label names Info Wealth CO, Pinellas Park, FL 33781, 888-338-0317 (as printed on the label), and that 888 number is the distributor's own line rather than this desk.
References
- U.S. Food and Drug Administration (2026). Tainted Sexual Enhancement Products.
The order desk
Buy Jelly Force through this desk
Four pack sizes, 30 gummies to a bottle. The order page carries the current prices and every order is covered for 60 days. Need to ask something first? +1 (302) 200-3480.
Keep reading
Jelly Force Testing & Quality
Ten seals, one lot number and no published test result. What each mark covers, and what it does not.
Read →The panelJelly Force Supplement Facts
The whole printed panel: calories, sugar, sodium, the 82 mg blend and the distributor block.
Read →BuyingJelly Force Shipping
Ships from the US unless the sales page says otherwise, tracking arrives by email, and the cost and speed are not published.
Read →